ERB-2109 Elite Bluetooth 2D Image Barcode Reader is the newest innovative, smallest, ergonomic shell design and most functional wireless 2D barcode scanner in the world. ERB-2109 is designed for mobile industries' use to capture barcode under 3 operating modes - Wireless, Wired and Memory modes. Just like every wireless device concerned by users, ERB-2109 offer the Bluetooth chip with the fastest connection without Pin code setting. Even though the device disconnected, it gets back to reconnect in the shortest seconds. For using ERB-2109 in public, turn on the vibrator can remind the operator when the barcode read.
With the most concern about power saving, ERB-2109 is designed with a power switch to turn off the power manually for saving power when the device is not going to work for a long time. Turn on power and reconnect with the host only takes very few seconds to work without delay. Wired cable with A Type or Mini USB plugs offered to connect when the power is very low or the operating environment is required only for cables. ERB-2109 offers HID keyboard emulator with very considerable design for the users convenience. Charging power and HID reading can exist at the same time for the highest efficiency.
The unique design to attach with a camera tripod for ERB-2109 is used for auto-sensing. This makes ERB-2109 be not only the portable wireless 2D barcode scanners but also the hands-free barcode reader. In any circumstances no matter with or without space, users can use ERB-2109 up to their need. For the temporarily out of connection with the host, ERB-2109 allows the user to save barcodes scanned in the device by program setting. The memory is up to 32KB, and the records can be transmitted via barcode setting again.
To be the smartest and savviest user, buy one device with multiple functions is the trend and the target in your mind. Chose ERB-2109 to be your next barcode reading device!
Features
Ergonomic Shell Design
Hand-Free Design for Camera Mini Tripod Matched Up
Capable to Scan the Barcode on a Mobile Phone or Screen with the Computer
Support OCR Scanning
Three Operating Mode for Wireless, Wired and Memory Use
Available to Work under Charge or Work with Power Adapter
One Spot Bluetooth Pairing
Hardware Battery Switch
Support Mobile OTG
Comprehensible LED indicators
Friendly Online Setting
Up to 72 Hrs Standby
Vibrator(Optioned)
Support Secure Simple Pairing(SSP)
Specifications
Bluetooth
Bluetooth Radio: Bluetooth Class 2, v2.1+Enhanced Data Rate(EDR) compatible 1.1, 1.2 and 2.0
Bluetooth Range: 30ft /10m when configured for Class 2
Bluetooth Profiles: HID keyboard wedge
LEDs
Scan LED: Red
Bluetooth Status LED: Blue
Battery Power LED: Green, Amber
Sleeping Mode LED: White
Button
Single Button to scan barcodes, wake up from Sleeping Mode and One Spot Pairing with Bluetooth
Switches
Left: Power Off / Power On
Right: Bluetooth Mode / HID Mode
Operating Modes
Bluetooth Mode: Real time data transmission via wireless
Wired Mode: USB Keyboard Mode(HID)
Memory Mode: Scans recorded until memory full
Scan Modes
Trigger Mode
Auto Sensing Mode
Battery
Battery: 950 mAh Lithium-ion
Charge Hours: Approx. 3 hours
Battery Life: Over 3,000 Scans(1 Scan / 1 Second, Function: Red Illumination, Vibrator Off, Trigger)
Image Sensor
CMOS, 752 × 480 Pixels
Light Source
LED(630nm ±10nm)
Resolution
5mil
Interface Supported
Bluetooth HID, USB Keyboard Emulation(Mini USB Jack)
Memory
32 KB Flash
Symbologies
2D: PDF417, QR Code(Model 1/2), DataMatrix (ECC200, ECC000, 050, 080,100,140), Aztec,
Maxicode, OCR*OCR B 7 Space 2 Type, etc.
1D: Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, China post 25,Interleaved 2 of 5, ISBN/ISSN, Code 93,etc.